Product FAQ

Yes. ALL KYDEX® sheet and ALLEN® sheet grades can be recycled. Please contact your Sales Representative or appLab™ for additional information on recycling code for an individual product.

SEKISUI KYDEX offers a wide range of polymer options including PVC, ABS, and PC. Please contact your Sales Representative or appLab™ for additional information.

Yes. All of our products are RoHS compliant.

Please contact your Sales Representative or appLab™ for a current Safety Data Sheet.

Yes. KYDEX® sheet is readily bondable to itself and various substrates. Please reference our Technical Brief section or contact appLab™ for additional information.

The dyne level of KYDEX® sheet is normally 32-38 dyne/cm.

No. KYDEX® sheet is textured on one side with a non-surface critical sandblast texture on the secondary surface.

The available thicknesses, widths, and textures of KYDEX® sheet and ALLEN® sheet products vary depending on grade and configuration. Please contact your Sales Representative or appLab™ for additional information.

KYDEX® sheet has outstanding chemical resistance to a wide range of chemicals. Please reference our Technical Brief section or contact appLab™ for additional information.

Yes. KYDEX® sheet can be cleaned with a wide range of cleaners and chemical reagents. Please reference our Technical Brief section or contact appLab™ for additional information.

Yes. ALLEN® sheet can be cleaned with a wide range of household cleaners. Please reference our Technical Brief section or contact appLab™ for additional information.

No. Ideal product replacement will depend on application, material performance, and required certifications. Please contact your Sales Representative or appLab™ for additional information.

Yes, but the finished appearance may vary. Please reference our Technical Brief section or contact appLab™ for additional information.

Yes, KYDEX® sheet and ALLEN® sheet products can be fabricated, machined, and formed using many standard industrial techniques. Please reference our Technical Brief section or contact appLab™ for additional information.

Flame spread index, or FSI, is the area under the distance-time plot, which is ft/min. It can range from 0-200.

No. SEKISUI KYDEX does not produce a plenum rated material.

See Technical Brief 111-D for details.

See Technical Brief 111-E for details.

See Technical Brief 111-C for details.

See Technical Brief 111-C for details.

See Technical Brief 111-B for details.

See Technical Brief 111-A for details.

Yes. Some ALLEN® sheet products are FDA and NSF approved for food zone or contact. Please contact your Sales Representative or appLab™ for additional information

Yes. Some KYDEX® sheet products are listed as NSF51 Splash Zone compliant. Please contact your Sales Representative or appLab™ for additional information.

At lower temperatures, residual processing lubricants may outgas. At temperatures above normal thermoforming temperatures (excess of 425ºF), PVC-based grades will begin to slowly degrade and release HCl. Please contact appLab™ for additional information and to obtain a copy of the product’s safety data sheet.

KYDEX® sheet products are not a food source and will not support fungal nor bacterial growth when tested to ASTM G21/G22.

Export Control Classification Number SEKISUI KYDEX ECCN: NLR or “No License Required.”

CAGE Code (Commercial and Government Entity) is a 5-digit code that identifies companies doing business with the federal government. First and last digits are numeric. SEKISUI KYDEX CAGE Code: 0HZM3

KYDEX sheet meets HS Tariff Code : 3920.99.0000 for “Other Plastic Sheet material.”

Fires involving KYDEX® sheet are no more toxic than any other fire.

The combination of fire gases released when KYDEX® sheet burns is similar to burning wood, fabric, and other materials commonly found in a building. The toxicity of building fire emissions from KYDEX® sheet is neither better nor worse than for many other common materials. The amount of dioxins produced by KYDEX® sheet in fires is found to be “insignificant.”

According to the EPA, the vinyl industry’s VCM emissions have been reduced by more than 99% since the 1970s.
There is no confirmed case on record where a member of the general population has been harmed by exposure to VCM.
The actual risk among five million individuals presumed to live within five miles of a vinyl production facility has been calculated to be less than 0.1 cases of cancer in the next 70 years.
For comparison, this is similar to the risk over a lifetime of smoking 1.4 cigarettes, drinking 0.5 liters of wine, and traveling 300 miles by car.

We do not recommend that KYDEX® sheet nor ALLEN® sheet be stored outside.

No. KYDEX® sheet and ALLEN® sheet products are rigid thermoplastic sheet and will not contain plasticizing agents.

Yes. There are a number of ways in which we recycle our non-plastic materials from everyday use. Here are a few:

- Metals, office paper and corrugated cardboard are recycled.
- Used oils are collected and converted to industrial fuel.
- Wood pallets are recycled and turned into garden mulch.

Also, post-manufactured packaging is biodegradable and/or recycled. It is designed to minimize weight/volume to reduce fuel consumption and the amount of packaging received by customers.

Our Kaizen methodologies constantly seek to improve material yield and minimize waste. Our internal recycling process also re-extrudes out-of-specification product and reuses it as raw material.

Air: the use of clean, non-smokestack energies, such as electricity, results in insignificant particulate matter or carbon dioxide emitted into the air.
Water: the use of water for processing is limited – water never comes in contact with the process; water is recycled internally so no surface water is discharged
Energy: we save energy across the entire lifecycle of manufacturing:

- Raw material is shipped in rail cars to minimize fuel consumption.
- KYDEX® thermoplastic sheet requires lower processing temperatures compared to most other polymers.
- High-efficiency motors and sophisticated temperature controls reduce energy consumption.

Type 2 PVC is high-impact PVC. Our PVC products would be considered Type 2 PVC.

PVC is such a small source of dioxins that levels in the environment would be essentially unchanged even if vinyl were not being manufactured and used every day.

- US EPA states dioxin levels in the environment are declining while vinyl production is growing.
- Studies by US Vinyl Institute show trace, insignificant levels of dioxin in PVC resins and products.
- US Vinyl Institute confirmed presence of low concentrations of dioxin in wastewater samples from four US plants that manufacture EDC/VCM.

Global Industry Alliance, Vinyl 2010, and Green Building Council of Australia.

Yes. KYDEX® T, KYDEX® 100, KYDEX® 430, and ALLEN® 8100BC meet ISO 10993-5 Cytotoxicity and ISO 10993-10 Irritation and Skin Sensitization criteria.

Mold shrinkage for male molds is 0.4% - 0.6% and female molds, 0.5% - 0.7%. See Technical Brief 140-B, Technical Brief 140-C and Technical Brief 140-E for details.

No, most KYDEX® sheet products are not UV resistant. For outdoor applications, it is recommended that KYDEX® sheet is painted or have a UV protective spray (Clear Jet) applied to prevent the material from color shifting. KYDEX® 510 has a Korad film that provides the material with UV protection. There are a number of ALLEN® thermoplastic sheet options for UV resistant and weatherable applications. Please contact your Sales Representative or appLab™ for additional information.